Back to Top

Team Japseed supported by Maxxis

Japspeed on Facebook

TiAL Sport MVS-A Exhaust Wastegate


Availability: In stock


Quick Overview

Flange Materials: 304L Stainless Steel
Pipe Size: Inlet Flange - 1.75" OD, Outlet Flange - 1.5" OD
Colours: Black, Blue, Red, Purple, Silver
Spring Pressures: 0.3 - 1.7 bar included
Thread: Air Ports (2) - M10x1.0, Water Ports (2)  - M8x1.0

* Required Fields

This MVS-A 38mm unit is designed specifically for motorsport applications that can't utilize the water cooling ports on the standard MV-S wastegate.  The MV-S-A or "long neck" has the standard 38mm valve but also has five heat fins that separate the casting from the actuator top.  Born into the world of Motorsport this wastegate can handle the harshest of conditions and give 100% performance 100% of the time.  It is the choice wastegate of many WRC teams.

- High temp NiCrFe based alloy is used for valve and 347SS valve housing will offer longer product life compared to competing designs

- High temperature silicone Nomex reinforced actuator diaphragm

- 17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resist "relaxing" at temperature to 900F (483C)

- Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing

- All Stainless Steel hardware

- Mating weld flanges are 304L

- Colour anodized aluminium actuator (Silver, Red, Blue, Purple, Black).

- 3 lower ports and two top ports for easy install, no need to rotate the actuator top at all, plugs included for unused ports.

- V-Band inlet and outlet make install easy, flanges and clamps are in the box!

- Integrated -4 AN water cooling ports that cycle a small amount of coolant through the actuator top to keep the temperatures down in extreme conditions such as road racing. These are leak tested after installation from the factory and can be removed if not utilized

- Five heat sinks raise the actuator top away from the casting to dissipate heat when water cooling cannot be used

- Designed for Motorsport/Road Racing

Included with every TiAL MVS-A:
MVS-A assembly
2 TiAL -4AN removable water fittings
MV-S valve seat
Inlet V-band clamp and flange
Outlet V-band clamp and flange
Two TiAL air fittings
Plugs for unused air ports
Extra actuator springs

Supported Cars TiAL Sport MVS-A Exhaust Wastegate
Special Price No

There are no products matching the selection.

Write Your Own Review

You're reviewing: TiAL Sport MVS-A Exhaust Wastegate