The Power of MVT
‘MVT’ stands for ‘Multi Vane Technology’ and significantly enhances the efficiency of an intercooler, reducing intake temperatures and boosting engine performance.
Carefully shaped vanes located inside the charge air end tank distribute gases across the entire intercooler core, achieving significantly greater cooling efficiency than a system without MVT.
Research into other intercooler designs revealed that most systems have acutely angled end tanks with very poor air flow characteristics. They also channel most of the charge air (as much as 80% of it) through as little as 20% of the intercooler core.
Many aftermarket intercoolers are much larger than stock to increase core surface area and cooling performance. However, these larger designs often require further vehicle modification for installation, and can adversely affect air flow leading to poor engine running.
Worth the wait
After identifying key weaknesses in other intercooler designs, over the course of two years engineers fine-tuned their new intercooler concept using state-of-the-art CAD software, as well as Computational Fluid Dynamics modelling analysis, and 3D printing technology.
Not content with simply creating new vanes to control air flow, engineers also developed new cast aluminium end tanks with incredible air flow characteristics. Prototype MVT Intercoolers were tested for fitment and performance until engineers were totally satisfied with their revolutionary design.
MVT in action
Fitted with Japspeed’s new front mount MVT Intercooler Kit, our Nissan R35 GT-R showed a 30.7hp increase in engine power on the dynamometer, with output rising from 512.4hp to 543.1hp. This improvement in engine performance was achieved without any other modification to the vehicle.
Nissan Skyline R32/ R33/ R34 RB25DET engine models
|Core Depth (mm)||
|Core Length (mm)||
|Core Width (mm)||
|Inlet & Outlet Bore (mm)||
|Overall Depth (mm)||
|Overall Length (mm)||
|Overall Width (mm)||
6 x bolts 6x nuts. T hose connector
6 x 75-67, 2 x 87-79
3 x Brackets, 2 x Spacers
|Pipe Bore's (mm)||
|Pipe Length 1 (mm)||
|Pipe Length 2 (mm)||
|Pipe Length 3 (mm)||
|Silicone 1, 2 (mm)||
|Silicone 3, 4 (mm)||
63 – 76
|Silicone 5 (mm)||
1160 L 4 ID
At Japspeed we offer you our best prices but to do this all our website prices only include delivery to the UK mainland. If your delivery address is outside the UK mainland please be aware there may be additional shipping charges. If this is the case; we will contact you before any payment is processed. We aim to dispatch all orders within 3 working days. If there is going to be a delay with dispatching your order we will contact you to advise you of this. We buy all our products in bulk in order to keep prices low and ensure we always have what you’re looking for in stock. However there may be occasions we are out of stock of a product you have ordered. If this is the case we will notify you as soon as possible and refund any payments made for the product in question. Any goods found to be faulty within 12 months of purchase will be repaired and where this is not possible, replaced. Please be aware that Japspeed will not be held responsible for any labour costs incurred for fitting of our products whether faulty or not. Please note all items must be installed by a qualified mechanic at a registered garage. Failure to do this will invalidate any warranty and returns policy. For information on warranty offered on your purchase, please either contact us by email at email@example.com or phone us on +44 (0) 844 489 080. Along with this, if you no longer require any items within your order, you have 14 days after delivery to cancel your order and return the goods back to us. All of our products are made with the highest quality materials and checked prior to dispatching. If you have any issues with your product, you have the right to contact us and for us to get the issue resolved, in accordance of the Consumer Rights Act 2015.
Only logged in customers who have purchased this product may leave a review.